Product Overview; Se4008; Leds; Ports - Linksys SE4008 User Manual

Product Overview

SE4008

Front View
LED Button
Ethernet Ports
Back View
WRT 8-PORT GIGABIT SWITCH | Product Overview
ETHERNET
Primary Indiators
ETHERNET
Secondary Indiators
Power Port
Power Switch

LEDS

The system LED is solid when the switch is powered on.
Ethernet 1 thru 8 (Primary)
Numbered LEDs correspond to the numbered ports on the switch's
back panel. If the LED is solid, a device is connected to that port.
A flashing LED indicates network activity over that port.
Ethernet 1 thru 8 (Secondary)
If the LED is not on, a device is connected to that port at 10/100 Mbps.
A solid LED indicates that a device is successfully connected to that
port at 1000 Mbps (Gigabit Ethernet).

PORTS

Ethernet
Connect Ethernet cables to Gigabit 10/100/1000 ports to add wired
devices to your network.
Power
Connect the included AC power adapter.

BUTTONS

Power Switch (European model)
Toggle to power on/off the switch.
LED On/Off Button
Press to enable/disable the Ethernet primary and secondary LEDs.
1