Advertisement
Product Overview
SE4008
Front View
LED Button
Back View
WRT 8-PORT GIGABIT SWITCH | Product Overview
Downloaded from
www.Manualslib.com
ETHERNET
Primary Indiators
ETHERNET
Secondary Indiators
Power Port
Power Switch
Ethernet Ports
manuals search engine
LEDS
The system LED is solid when the switch is powered on.
Ethernet 1 thru 8 (Primary)
Numbered LEDs correspond to the numbered ports on the switch's
back panel. If the LED is solid, a device is connected to that port.
A flashing LED indicates network activity over that port.
Ethernet 1 thru 8 (Secondary)
If the LED is not on, a device is connected to that port at 10/100 Mbps.
A solid LED indicates that a device is successfully connected to that
port at 1000 Mbps (Gigabit Ethernet).
PORTS
Ethernet
Connect Ethernet cables to Gigabit 10/100/1000 ports to add wired
devices to your network.
Power
Connect the included AC power adapter.
BUTTONS
Power Switch (European model)
Toggle to power on/off the switch.
LED On/Off Button
Press to enable/disable the Ethernet primary and secondary LEDs.
1
Advertisement
