Before First Use - FeinTech FLR00100 Instructions Manual

Before first use

Inserting or changing the filter
The unit is supplied with a filter inside. You must remove the packaging of the filter before using the appliance. To do this,
open the casing and take out the filter. Unpack it. Then put it back into the machine as described below.
Note: Make sure that you insert the filter in the correct position.
• Place the unit upside down on a soft cloth to avoid scratches.
• To open the bottom cover, turn the bottom cover counterclockwise. There is an arrow mark in the bottom cover. On
the bottom edge of the housing is a mark for OPEN and LOCK. Turn the bottom cover so that the arrow mark points to
OPEN.
• Remove the bottom cover and take out the filter.
• Remove the plastic wrapping from the filter.
• Then put the filter back in place.
• Close the housing again with the base cover. To do this, turn clockwise so that the arrow mark is on LOCK (closed).
When everything has been closed correctly, you will hear a click.