Typical Applications - Valor DuraVent 46DVA FF Co-axial DV Flex Series Installation Manual

Typical Applications

Wall termination
with "slip"
connection
Wall thimble
(required for
combustible
construction)
Wall termination
with "slip"
connection
Wall thimble
(required for
combustible
construction)
DuraVent rigid pipe
section or
DuraVent collar/adapter
on appliance
Short rigid pipe
section thru wall
Short rigid pipe
section thru wall
Min. 7"
radius
Rigid elbow
(used to keep pipe closer to
wall and avoid/eliminate
possible gooseneck in flex)
Flex pipe to
provide offset
This end will ONLY fit to
DuraVent style collars
Flex pipe to
provide bend
This end will ONLY fit to
DuraVent style collars
Minimum 5% rise between
end collars of flex when
running horizontally -
i.e. min. 2" rise for 36" length
and min. 6" rise for 120" length
Rigid pipe
section
Flex pipe to
provide offset
DuraVent rigid pipe
section or
DuraVent collar/adapter
on appliance
3