Allen-Bradley PowerFlex SK-20P-S725804 Installation Instructions Manual

Installation Instructions
Original Instructions
PowerFlex DC Drive – Frame D, Series C to Series C Fan
Replacement
Catalog Number SK-20P-S725804
Identify Frame D, Series C
Drive
ATTENTION: Only qualified personnel familiar with DC drives and associated
machinery must plan or implement the installation, startup, and subsequent
maintenance of the system. Failure to comply can result in personal injury and/
or equipment damage.
ATTENTION: To avoid an electric shock hazard, make sure that all power to the
drive is removed before performing the following.
ATTENTION: This drive contains ESD (Electrostatic Discharge) sensitive parts
and assemblies. Static control precautions are required when installing, testing,
servicing, or repairing this assembly. If ESD control procedures are not followed,
component damage can result. If you are not familiar with static control
procedures, reference Allen-Bradley publication 8000-4.5.2, 'Guarding Against
Electrostatic Damage' or any other applicable ESD protection handbook.
Verify that you are working on a Frame D, series C drive by checking the data
nameplate label on the lower right side of the drive. The frame size is printed just
above the serial number in the lower right corner of the label. The series letter is
printed on the upper right corner of the label.
A0NNN
Series: C
I/O: 24VDC (Standard)
3 Phase
Original Firmware V. 5.007
500HP
6.2
8.2
max. 1 Phase
Hz 1.0/0.5A 1 Phase
Frame: D
Serial Number: D23E0042
N223
C US
R
Listed
Ind. Cont.
Eq. 31KF