Subscribe to Our Youtube Channel
Related Manuals for TentCraft MONARCHSTALL
Summary of Contents for TentCraft MONARCHSTALL
- Page 1 MONARCHSTALL SETUP INSTRUCTIONS...
- Page 2 TentCraft Inc in no way represents the estimated holding power to be true in all cases. It is an estimate, and as such, does not imply that the figures are sufficient to hold any structure securely in windy or adverse weather conditions.
- Page 3 MONARCHSTALL Step 1 To start, lay out all parts on the ground in front of you as shown. Find the two back poles that are laser- etched with “BACK TOP” and connect them together until the button securely clicks in place. Connect the remaining poles together the same way.
- Page 4 MONARCHSTALL Step 3 Lift up the top “X” frame pieces and latch the steel stabilizer hook over the catch on the opposite pole. This locks the “X” in place. Step 4 Drape the roof over the top of the frame.
- Page 5 MONARCHSTALL Step 5 Extend the top 4 legs of each X. To extend, press the button and pull out the pole until it locks, extended, in place. Repeat this step for the remaining legs. Step 6 If you have a valence, attach it using the Velcro on the front edge.
- Page 6 Repeat for the remaining legs. Step 8 Your MONARCHSTALL is complete! **Proper ballasting is the key to a long and happy life for tents. Use the included sand bags on the rear legs and the stake kit or footplates on the front legs. **...
Need help?
Do you have a question about the MONARCHSTALL and is the answer not in the manual?
Questions and answers