Advertisement
Table of Contents
- 1 Step 1: Remove the Sunshade and Poles from the Carrying Bag.
- 2 Step 4: Lay the Sunshade out on the Ground, Right Side Up.
- 3 Step 6: Repeat this Step Using the Longest Blue Tipped Pole.
- 4 Step 7: Flip the Sunshade Over.
- 5 Step 9: the Pole will Lie in a Pocket Created by the Zipper.
- Download this manual
Advertisement
Table of Contents
Related Manuals for TentCraft GYBE
Summary of Contents for TentCraft GYBE
- Page 1 | SUN SHADE SETUP INSTRUCTIONS...
- Page 2 TentCraft Inc in no way represents the estimated holding power to be true in all cases. It is an estimate, and as such, does not imply that the figures are sufficient to hold any tent securely in windy or adverse weather conditions.
- Page 3 SUN SHADE Step 1 Remove the sunshade and poles from the carrying bag. The poles are located inside a Velcro pocket on the inside of the carrying bag. Step 2 Locate the six poles with blue tips and assemble them into three individual poles.
- Page 4 SUN SHADE Step 5 Insert the two shorter blue tipped poles into the two shorter pockets on either side of the middle pocket. Close the Velcro tab at the end of the pocket to hold the pole in place. Step 6 Repeat this step using the longest of the blue tipped poles and inserting it into the middle black pocket.
- Page 5 SUN SHADE Step 9 The pole will lie in a pocket created by the zipper. Zip this closed to attach the pole to the sunshade. Step 10 Once all poles have been inserted, locate the zipper that runs along the full length of the sunshade.
- Page 6 SUN SHADE Step 13 Once zipped, run the Velcro straps on the bottom of the sunshade through the metal brackets found on both legs of the tent.
Need help?
Do you have a question about the GYBE and is the answer not in the manual?
Questions and answers