1. Manuals
  2. Brands
  3. TentCraft Manuals
  4. Tent
  5. HEXAGON PAVILION
  6. Setup instructions

TentCraft HEXAGON PAVILION Setup Instructions

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HEXAGON PAVILION
SETUP INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HEXAGON PAVILION and is the answer not in the manual?

Questions and answers

Related Manuals for TentCraft HEXAGON PAVILION

Summary of Contents for TentCraft HEXAGON PAVILION

  • Page 1 HEXAGON PAVILION SETUP INSTRUCTIONS...
  • Page 2 TentCraft Inc in no way represents the estimated holding power to be true in all cases. It is an estimate, and as such, does not imply that the figures are sufficient to hold any tent securely in windy or adverse weather conditions.
  • Page 3 HEXAGON PAVILION Step 1 The hexagon pavilion is packaged into five metal shipping containers. Two contain metal legs and shoulder pieces, two contain counters and 1 contains wall panels. Remove all pieces from these containers and set them aside. Step 2 Start by opening the leg so it forms a 90-degree angle.
  • Page 4 HEXAGON PAVILION Step 5 With the star bracket lying on its side, attach two opposite legs to by sliding them over the star bracket and pressing the push button in until it locks into place. **Be sure to install two legs opposite from one another – not next to each other.**...
  • Page 5 HEXAGON PAVILION Step 9 With two people (one on each end), lift a wall panel and walk it in between two legs. Locate the pin that faces downward on the inside edge of the wall panel and insert it into the hole found on the counter support. Repeat this step for the opposite side of the wall panel.
  • Page 6 HEXAGON PAVILION Step 13 The metal tabs on the bottom of the counters are inserted down into the slits in the counter supports. Step 14 Repeat steps 12 and 13 to install the remaining five counter sections. Step 15 From underneath the counters, at each leg, take the remaining pin and slide it through the counter support and metal counter tabs to secure both counters to the counter support.
  • Page 7 HEXAGON PAVILION Step 17 Climb the ladder and unfold the roof so that it covers the majority of the shoulder pieces. Locate the grommet in the middle of the roof and place it on the top of the peak pole. Insert the peak cap through the grommet and into the grey peak liner to hold the roof in place.
  • Page 8 HEXAGON PAVILION Step 21 While holding the peak pole in place, insert the remaining pin through the hole in the pole to secure it in the extended position.

Table of Contents