Mixed and gas fuelled built-in hot plates (19 pages)
Summary of Contents for Kuppersbusch GWS 457.0
Page 1
Montageanweisungen Instructions for use and installation instructions Instructions d’utilisation et avis de montage Gebruiksaanwijzing en montagehandleiding Istruzioni di uso e di montaggio Instrucciones de uso y de montaje Instruções de uso e de montagem Ðtv³wuÒ xvÒvÒ ÊËw Ò´ÎËxÑÐÌгvÒvÒ GWS 457.0...
What to do if trouble occurs... Assembly and installation Important! Fault Cause Remedy DVGW-TRGI 1986/96 TRF 1996 ÖVGW-TRGI and TRG 2 Part 1...
Page 7
Top view Detail Worktop Making the worktop recess The hob must under no circumstances be sealed with silicone sealant!
Page 8
Checking or replacing the sealing Special case: Installing in a worktop made of stone for 30 mm worktops: for 40 mm worktops: Drive in the clips Insert the clips of the hob...
Converting to a different type of Injector specification full flame injector / low flame injector Gas type Inner burner Outer burner Attention: Gas type, pressure Injector sets...
Page 10
Replacing the low flame injectors on the gas tap Removing the hob Replacing the full-flame injectors Remove the tap tube and the gas tap. “A” “A” “B” Primary ventilation duct setting Gas type Inner burner Outer burner (opening B) (dimension A)
Page 11
Appliance installation “A” Re-installing the hob...
Technical data Country Natural gas Natural gas LL Natural gas Pressure couple Pressure couple Butane Category H, E (G 20) (G 25) L (G 25) Natural gas E+ (butane/propane (butane/propane (ISO abbreviation) (G 20/25) gas) (G 30/31) gas) (G 30) Burners Natural gas Butane/propane gas...
Need help?
Do you have a question about the GWS 457.0 and is the answer not in the manual?
Questions and answers