Troubleshooting; Physical Reset Button - Bosch FLEXIDOME indoor 5100i User Manual

FLEXIDOME indoor 5100i (IR) | FLEXIDOME
outdoor 5100i (IR)
5

Troubleshooting

5.1

Physical reset button

Each camera has a hardware reset button. You may need to press the reset button to reset the
camera to factory defaults if you encounter the following circumstances:
–
–
–
–
–
–
–
–
–
–
–
Notice!
A factory default deletes all camera settings including passwords, network settings, and
i
image settings.
Complete the following sequence of steps only if you have no other option to restore
operation to the camera.
Steps to complete a hardware reset for the camera
1.
2.
For more information on how to access the camera's physical reset button, please consult the
Installation manual.
Bosch Security Systems B.V.
You can power up the camera but cannot log on to the camera using the web browser.
The camera doesn't start up, or fails to power up via PoE.
The camera cannot search an IP address.
The camera's firmware crashed.
You forgot the password to access the camera.
The image becomes frozen.
You cannot update the firmware.
The camera disconnects from the network at random and needs a reboot.
The camera no longer finds pre-positions (preset positions).
You cannot configure the camera using the web browser.
The camera has no video out.
Apply power to the camera. Search for the IP address, and then log on to the camera
using the web browser. (Note: You can use Configuration Manager to identify the IP
address.)
Find the hardware reset button on the camera block. (See each section below to locate
the reset button for your camera model.)
User manual
Troubleshooting | en
11-2022 | V02 | F.01U.394.427
53