Yeti SB160 Owner's Manual page 22

FREQUENTLY ASKED QUESTIONS (2 OF 2)
HOW BIG OF A ROTOR WILL FIT ON THE FRAME?
The SB160 has a direct mount rear brake tab and can run a 180mm rotor without the need for
a brake adaptor. With the use of a brake adaptor the frame can accept up to a 203mm rotor.
CAN I RUN A STEALTH SEATPOST DROPPER ON THE SB160?
Yes. The SB160 has routing options for stealth only.
WHAT CHAINLINE WAS THE SB160 DESIGNED AROUND?
The SB160 was designed around a 55mm Boost chainline. Depending on the crank and chain ring
configuration you can run other chainlines but you will have to do a clearance check first.
WHAT IS THE MAX SIZE SINGLE-CHAINRING THAT FITS ON THE SB160?
Without getting too technical, the max chainring size depends on the crank chainline and the
chainring shape.
• Shimano / SRAM 55mm chainline Boost cranks: 34t round / 32t oval
• Minimum Chainring Size: 28t round / 30t oval
Confused? Ask your local dealer or call us 303.278.6909.
DOES THE SB160 HAVE ISCG MOUNTS?
Yes. The SB160 has integrated ISCG '05 mounts. It is designed to work best with low-profile
modern guides; depending on the brand, some older models with larger upper guides may
not fit. We always recommend performing a fit-check with a specific chainguide to confirm
compatibility.
WHAT TYPE OF SHOCK DOES THE SB160 USE?
The SB160 uses a 230 x 65mm shock. Depending on the shock model, it can be locked out but
we recommend running it fully open for the best compliance and traction.
WHAT TYPE OF SHOCK HARDWARE DOES THE SB160 USE?
The SB160 uses M8x36mm hardware on the air can side and a custom Yeti reducer on the shaft
side. If you swap between shocks, the reducer can be found here,
gear/parts/shock-eyelet-spacer
CAN I PUT A COIL SHOCK ON MY SB160?
Yes, the SB160 is designed to be compatible with both air and coil-sprung shocks.
WHAT PERCENTAGE SAG DO YOU RECOMMEND FOR THE SB160?
We would advise starting with 30% sag, or 19.5mm of shock stroke for optimal pedaling efficiency
and terrain compliance. Be sure to set your sag at your normal riding weight, gear included. Feel
free to venture slightly above or below 30% to suit your personal preference.
Visit our shock set up page to help set up your suspension,
https://shocksetup.yeticycles.com/calculator
WHAT SIZE SEAT POST DOES THE SB160 USE?
The SB160 uses a 31.6mm seat post.
WHAT SIZE SEAT COLLAR DOES THE SB160 USE?
The SB160 uses a 36.4mm seat collar.
WHAT IS THE WARRANTY ON MY SB160?
The SB160 has a LIFETIME manufacturer's warranty.
WHAT IS THE LONGEST TRAVEL DROPPER POST I CAN RUN ON THE SB160?
This is mostly defined by your inseam. You can run any travel as long as you are above the
minimum insert mark and you are not so low your tire rubs on your saddle or your dropper
bottoms out in the frame. Your local Yeti dealer can help you sort this out. We run 150mm
drop on SM frames, 175mm drop on MD frames and a 200mm drop on LG-XXL.
CAN I CONVERT THIS BIKE INTO A "MULLET" BIKE AND PUT A 27.5" WHEEL ON REAR OF
THE SB160?
It is possible, but we would not suggest it as it would lower your BB too much and slacken your
head tube angle and seat tube angle. But hey, if those changes suit your ride style then go for it.
WHAT HEADSET TOP CAP DOES THE SB160 USE?
The SB160 uses a 51mm top cap rather then the standard cap diameter. We use this larger cap
because the SB160 is tested to Yeti's more rigorous DH test standards which require a larger
headtube wall thickness.
https://www.yeticycles.com/
SB160 | OWNER'S MANUAL
22