Airmotiv S12 - Emotiva Airmotiv Series User Manual

AIRMOTIV SUBWOOFERS

Airmotiv S12

The Airmotiv S12 is the ideal way to extend the bass
response of your audio system to cover the last few critical
octaves of bass with authority and finesse. The Airmotiv S12
can deliver the raw power you need to add that final touch
of realism to a movie, while still offering the low distortion
and precise control you need for accurate, superb sounding
music reproduction. The Airmotiv S12 delivers slightly
less low bass extension than the S15, but is slightly more
compact, and is ideal for smaller rooms.
Driver Complement
Active driver: 12" downward firing heavy duty long throw
subwoofer with cast aluminum frame, 2-1/2" copper voice
coil, non-pressed paper cone reinforced with aramid fibers,
tough SBR rubber surround, vented pole piece, and forced
air cooling.
Passive radiator: 12" front firing passive radiator with cast
aluminum frame, non-pressed paper cone reinforced with
aramid fibers, and tough SBR rubber surround.
Cabinet
Heavily braced acoustically inert MDF cabinet with
removable sculpted fabric-covered grill. The front bezel is
finished in several coats of satin finish black lacquer; the
sides and rear are covered in tough attractive textured vinyl.
Electronics
Amplifier type: Audiophile quality Class A/B amplifier.
Amplifier power: 500 Watts RMS.
Protection: advanced multi-stage low-distortion limiter.
Frequency response: 24 Hz - 200 Hz (+/- 3 dB).
Inputs: Single XLR balanced input; summed left and right
RCA unbalanced inputs.
Controls: Crossover, Phase, Volume, LF Boost.
AC power: User selectable line voltage;
115 VAC/60 Hz (6.3A Fuse); 230 VAC/50 Hz (3A Fuse).
Mechanical
Dimensions: 17-3/8" high x 15-3/4" wide x 16-7/8" deep.
Weight: 66.2 pounds.
.
Feet: Permanently attached anti-slip rubber feet
Page 12