Emotiva Airmotiv Series User Manual page 14

AIRMOTIV SUBWOOFERS
9. AC Power Switch
Use this switch to turn the main AC Power to your Airmotiv subwoofer On and Off.
Note: Your Airmotiv sub will only operate if the AC POWER Switch is turned ON. If the AC POWER
Switch is OFF, your Airmotiv sub will NOT operate, and the Power Mode Switch will have no
effect.
10. Line Voltage Selector
This switch is used to select the appropriate line voltage for your area.
Note: Be sure to set this switch to the correct line voltage for your area. If you fail to do so,
damage to your Airmotiv sub may result.
Note: If you change the Line Voltage setting, you should also change the FUSE in the Airmotiv
Sub to the appropriate value (one fuse in each value is provided with your Airmotiv subwoofer).
11. IEC Power Cable Receptacle
The IEC Power Cable receptacle accepts any standard IEC power cable. A high quality commercial
power cable is provided with your Airmotiv subwoofer.
12. Fuse Holder
To change the fuse in your Airmotiv subwoofer, remove the power cable, then gently pry the
fuse compartment open. (The fuse holder opens like a drawer.) Replace the fuse with one of the
correct value, replace the fuse drawer, and reinsert the power cable.
Note: If the fuse in your Airmotiv subwoofer blows repeatedly without apparent reason, then
you might have an electrical fault in your Airmotiv subwoofer, and you should call Emotiva
Technical Support for assistance.
Page 10