Table of Contents
Advertisement
AIRMOTIV SUBWOOFERS
Airmotiv S10
The Airmotiv S10 is the ideal way to extend the bass response
of your audio system to cover the last few critical octaves of
bass with authority and finesse. The Airmotiv S10 can deliver
the raw power you need to add that final touch of realism
to a movie, while still offering the low distortion and precise
control you need for accurate, superb sounding music
reproduction. The Airmotiv S10 delivers slightly less low bass
output than the S12, but its smaller footprint makes it the
ideal solution for installations where space is at a premium.
Driver Complement
Active driver: 10" downward firing heavy duty long throw
subwoofer with cast aluminum frame, 2" copper voice coil,
non-pressed paper cone reinforced with aramid fibers, tough
SBR rubber surround, vented pole piece, and forced air
cooling.
Passive radiator: 10" front firing passive radiator with cast
aluminum frame, non-pressed paper cone reinforced with
A
aramid fibers, and tough SBR rubber surround.
Cabinet
Heavily braced acoustically inert MDF cabinet with removable
sculpted fabric-covered grill. The front bezel is finished in
several coats of satin finish black lacquer; the sides and rear
are covered in tough attractive textured vinyl.
Electronics
Amplifier type: Audiophile quality Class A/B amplifier.
Amplifier power: 350 Watts RMS.
Protection: advanced multi-stage low-distortion limiter.
Frequency response: 26 Hz - 200 Hz (+/- 3 dB).
Inputs: Single XLR balanced input; summed left and right RCA
unbalanced inputs.Controls: Crossover, Phase, Volume, LF
Boost.
AC power: User selectable line voltage;
115 VAC/60 Hz (4A Fuse); 230 VAC/50 Hz (2A Fuse).
Mechanical
Dimensions: 16-1/8" high x 14" wide x 15-7/8" deep.
Weight: 52.1 pounds.
.
Feet: Permanently attached anti-slip rubber feet
Page 13
Advertisement
Table of Contents
