Table of Contents
Advertisement
Entering BIOS Setup
1.
Turn on the server and the monitor.
If the server is already turned on, close all open applications, then restart the server.
2.
During POST, press DEL
If you fail to press DEL before POST is completed, you will need to restart the server. The Setup Main menu
will be displayed showing the Setup's menu bar. Use the left and right arrow keys to move between
selections on the menu bar.
BIOS Setup Program Function Keys
<→><←>
Move the selection bar to select the screen
<↑><↓>
Move the selection bar to select an item
<Enter>
Execute command or enter the submenu
<+>
Increase the numeric value or make changes
<->
Decrease the numeric value or make changes
<F1>
Show descriptions of general help
<F3>
Restore the previous BIOS settings for the current submenus
<F9>
Load the Optimized BIOS default settings for the current submenus
<F10>
Save all the changes and exit the BIOS Setup program
<Esc>
Main Menu: Exit the BIOS Setup program
Submenus: Exit current submenu
Main
This setup page includes all the items of the standard compatible BIOS.
Advanced
This setup page includes all the items of AMI BIOS special enhanced features.
(ex: Auto detect fan and temperature status, automatically configure hard disk parameters.)
Chipset
This setup page includes all the submenu options for configuring the functions of the Platform Controller Hub.
Server Management
Server additional features enabled/disabled setup menus.
Security
Change, set, or disable supervisor and user password. Configuration supervisor password allows you to restrict
access to the system and BIOS Setup.
A supervisor password allows you to make changes in BIOS Setup.
A user password only allows you to view the BIOS settings but not to make changes.
Boot
This setup page provides items for configuration of the boot sequence.
Save & Exit
Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup. (Pressing <F10>
can also carry out this task.)
Abandon all changes and the previous settings remain in effect. Pressing <Y> to the confirmation message will
exit BIOS Setup. (Pressing <Esc> can also carry out this task.).
6
Advertisement
Table of Contents
