Gigabyte MB10-DS1 User Manual page 19

PCI Latency Timer
VGA Palette Snoop
Above 4G Decoding
SR-IOV Support
PCI Express Settings
Relaxed Ordering
Extended Tag
No Snoop
Maximum Payload
Maximum Read Request
Extended Synch
Link Training Retry
Link Training Timeout (us)
Unpopulated Links
Value to be programmed into PCI Latency Timer
Register.
Enable/Disable VGA Palette Registers Snooping.
Enable/Disable memory mapped I/O to 4GB or
greater address space (Above 4G Decoding).
If the system has SR-IOV capable PCIe devices, this
item Enable/Disable Single Root IO Virtualization
Support.
Press [Enter] for configuration of advanced items.
Enable/Disable PCI Express Device Relaxed
Ordering feature.
When this feature is enabled, the system will allow
device to use 8-bit Tag field as are quester.
Enable/Disable PCI Express Device No Snoop
option.
Set maximum payload for PCI Express Device or
allow system BIOS to select the value.
Set maximum Read Request size for PCI Express
Device or allow system BIOS to select the value.
When this feature is enabled, the system will allow
generation of Extended Synchronization patterns.
Define the number of Retry Attempts software will
take to retrain the link if previous training attempt
was unsuccessful. Press <+> / <-> keys to increase
or decrease the desired values.
Define the number of Microseconds software will
wait before polling 'Link Training' bit in Link Status
register. Press <+> / <-> keys to increase or
decrease the desired values. Value rang is from 10
to 10000 us.
When this item is set to 'Disable Link, the system will
operate power save feature for those unpopulated
PCI Express links.
19
[32 PCI Bus Clocks]
64 PCI Bus Clocks
96 PCI Bus Clocks
128 PCI Bus Clocks
160 PCI Bus Clocks
192 PCI Bus Clocks
224 PCI Bus Clocks
248 PCI Bus Clocks
Enabled
[Disabled]
[Enabled]
Disabled
Enabled
[Disabled]
Enabled
[Disabled]
Enabled
[Disabled]
[Enabled]
Disabled
[Auto]
128 Bytes
256 Bytes
512 Bytes
1024 Bytes
2048 Bytes
4096 Bytes
[Auto]
128 Bytes
256 Bytes
512 Bytes
1024 Bytes
2048 Bytes
Enabled
[Disabled]
[Keep Link ON]
Disable Link