Upgrading Main Memory - Fujitsu Siemens Computers D1132 Technical Manual

Upgrading main memory

These slots are suitable for 16, 32, 64, 128 and 256 Mbyte SDRAM memory modules of the DIMM
format.
Memory modules with different memory capacities can be combined.
DIMM = Dual Inline Memory Module
SDRAM = Synchronous Dynamic Random Access Memory
You may only use unbuffered 3.3V memory modules. Buffered memory modules are not
!
permitted.
SDRAM memory modules must be designed for a clock frequency of 100 MHz or higher
(meets PC100 specification).
Installing memory modules
2
Ê
Flip the holders on each side of the relevant location outwards.
Ê
Insert the memory module into the location.
Ê
At the same time flip the lateral holders upwards until the memory module snaps in place.
Removing a memory module
1
Ê
Flip the holders to the right and left of the location outwards.
Ê
Pull the memory module out of its location.
A26361-D1132-Z120-3-7419
Add-on modules
2
1
English - 13