Slot Sequence; Upgrading Main Memory - Fujitsu Siemens Computers D1306 Manual

Slot sequence

Insert 64 bit / 66 MHz adapter preferably into PCI slots 2, 3.
Insert 64 bit / 33 MHz adapter preferably into PCI slots 4, 5.
Insert 32 bit / 33 MHz adapter preferably into PCI slots 1, 6.
Take special care to the coding of the PCI slot and the adapter when you select a PCI
!
slot.

Upgrading main memory

These slots are suitable for 128, 256, 512 and 1024 Mbyte SDRAM memory modules of the DIMM
format. The board supports a maximum of 4 Gbytes.
In other words, you fit the first pair to bank 0, and the second pair in bank 1. One memory bank
must always be fully equipped with memory modules of the same type.
You may only use buffered (registered) 3.3V memory modules. Unbuffered memory
!
modules are not permitted.
SDRAM memory modules must be designed for a clock frequency of 133 MHz (meets
PC133 specification).
Installing a memory module
2
Ê
Push the holders on each side of the memory compartment outwards.
Ê
Insert the memory module in the slot while folding the side holders up until the memory module
engages (2).
A26361-D1306-Z120-1-7419
Add-on modules
2
English -
11