Maintenance; Cleaning; Lubrication - Panduit CTFP-25 Original Operating Instructions

© Panduit Corp. 2019
4.

MAINTENANCE

The CTFP-25 must be
opened. Disconnect
compressed air!
4.1

Cleaning

• Unscrew hexagon socket screw (1).
• Pull out the die set (2).
• Clean die set (3) and lightly oil pivot (4).
• Push in die set (5).
• Tighten hexagon socket screw (6).
4.2

Lubrication

• Unscrew the head (1).
• Remove the spring (2) and piston (3).
• Lubricate the two arms of the die set (4) (e. g.
CHEMPLEX 746).
• Insert arms of the die set and spring.
• Insert head (5) and fasten fingertight.
PA29442A01_02_ENG
OPERATING INSTRUCTIONS
Figure 4 - Cleaning
Figure 5 - Lubrication
Page: 6 of 8
CTFP-25
ENGLISH
3-2019