Moving The Printer - Lexmark T640 Connection Manual

Moving the printer

Follow these guidelines to move the printer to another location.
CAUTION: The printer weighs 23 kg (51 lb). It requires at least two people to lift it safely. Use the printer
handholds to lift it, and make sure your fingers are not under the printer when you set it down.
CAUTION: Follow these guidelines to avoid injuring yourself or damaging the printer:
• Remove all printer options before moving the printer. Place the options in the original packaging.
• Always use at least two people to lift the printer.
• Always turn off the printer using the power switch before moving it.
• Disconnect all cords and cables from the printer before moving it.
Note: Damage to the printer caused by improper moving is not covered by the printer warranty.
Moving the printer and options to another location
The printer and options can be safely moved to another location by following these precautions:
• Keep the printer in an upright position.
• Any cart used to move the printer must have a surface able to support the full bottom surface of the printer.
Any cart used to move the options must have a surface able to support the dimensions of the options.
• Severe jarring movements may cause damage to the printer and options, and must be avoided.
Moving the printer
Page 1 of 1