Lexmark T420 User Reference page 30

2
Gently remove the jam based on how much is visible.
•
If the middle of the sheet of print media is visible, but not the ends, grasp the print media on
both sides and gently pull it straight out toward you.
•
If an end of the jam is visible, pull it straight out toward you.
3
Close the rear output bin door by pushing it in the middle under the tab.
Note: Make sure the door closes on both sides.
Jams in the fuser
1
Open the upper front door. (See
instructions.)
2
Remove the print cartridge. (See
instructions.)
CAUTION:
The inside rear of the printer may be hot.
Tab
page 69 in Removing the used print cartridge
page 70 in Removing the used print cartridge
30
if you need
if you need