Black & Decker BEBLV290 Original Instructions Manual page 13

♦ Injuries caused when changing
any parts, blades or accessories.
♦ Injuries caused by prolonged use
of a tool. When using any tool for
prolonged periods ensure you
take regular breaks.
♦ Impairment of hearing.
♦ Health hazards caused by
breathing dust developed when
using your tool (example:-
working with wood, especially
oak, beech and MDF.).
Vibration
The declared vibration emission
values stated in the technical
data and the declaration of
conformity have been measured
in accordance with a standard test
method provided by EN50636 and
may be used for comparing one
tool with another. The declared
vibration emission value may
also be used in a preliminary
assessment of exposure.
Warning! The vibration emission
value during actual use of the
power tool can differ from the
declared value depending on the
ways in which the tool is used.
The vibration level may increase
above the level stated.
When assessing vibration exposure
to determine safety measures
required by 2002/44/EC to protect
persons regularly using power tools
in employment, an estimation of
vibration exposure should consider,
the actual conditions of use and
the way the tool is used, including
taking account of all parts of the
operating cycle such as the times
when the tool is switched off and
when it is running idle in addition to
the trigger time.
Labels on Appliance
The following pictograms, along
with the date code, are shown on
the tool.
Warning! Read the manual
prior to operation.
Wear safety glasses or
goggles when operating this
appliance.
Wear suitable ear protection
when operating this
appliance.
ENGLISH
13