Table of Contents
Advertisement
CLEANING & CARE
Before cleaning and maintenance, turn off the fan and pull the plug out of the socket.
Surface
Gently wipe the fan surface with a soft, dry cloth
If the surface of the fan is dirty, use a solution of water and diluted
detergent and wipe the surface of the fan with a soft cloth.
Wipe dry with a soft cloth.
Air inlet and air outlet
Use a soft brush or vacuum cleaner to clean the dust at the air
inlet and outlet. If there is too much dust, this can affect the fan's
performance.
Remote control
Gently wipe the surface of the remote control with a soft, dry cloth. If it will not be used for
an extended period, remove the batteries.
Plug
Clean the plug with a soft, dry cloth.
Notes:
Do not use any harsh cleaning agents or lubricants on this fan.
Filter replacement
This fan has a memory function for filter replacement. After 720 hours of operation, the
display will illuminate a sequence of indicators (as shown below) when the fan is turned on.
The fan will make a buzzing sound five times after the display shows as below to notify the
filter must be replaced.
21
Advertisement
Table of Contents
