Table of Contents
Advertisement
Having trouble connecting?
The prior steps detail the process for 'EZ Mode' connection. If that does not work for your
connection, we suggest trying it again, and if still no success, attempting the following
method for AP Mode connection.
Set device in AP pairing mode
Set the device in pairing mode pressing and holding the oscillation button/display for five
seconds again until the fan emits three beeps the display shows 'F' flashing slowly.
Using AP Mode to add device
1. Follow the previous steps to select your product type (Heating & Cooling > Fans).
2. Adjust your connection method by tapping on the mode type in the top-right corner of
the screen. Select 'AP Mode' for the set-up type.
3. Ensure that the device is in pairing mode, with the display flashing 'F' slowly, and tap
'Confirm light is slowly flashing'.
4. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app
are connected to the same Wi-Fi network during setup.
Notes:
• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.
13
Advertisement
Table of Contents
