Table of Contents
Advertisement
Oscillation using the display
When the fan is operating, oscillation can also be activated by touching the display.
• Touch and hold the display for one second. The fan will beep once and start oscillating.
• Touch and hold the display again for one second. The fan will beep once and stop
oscillating.
Tilting the fan
Ensure the fan has been turned off before tilting.
Hold the fan body with one hand and set the wind outlet 15° forwards or backwards.
Note when using the remote control
This fan may respond to the remote controls of other devices and vice versa. This is due to
the remote controls being of the same frequency and is a normal phenomenon.
To prevent this from happening:
• Keep the remote controls of other devices away from the fan.
• When using the remote control, point it towards the signal receiver.
Signal receiver
9
Advertisement
Table of Contents
