Table of Contents
Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the display will
be flashing 'F' rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the display for five seconds until you hear three beeps
and the display shows 'F' flashing rapidly.
Add device through network
1. Once registered, tap 'Add Device' on the app's home page, or the '+' in the upper
right corner, to add a new device through the network.
2. Select the product type from the list of options in the app
3. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app
are connected to the same Wi-Fi network during setup.
Notes:
• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.
(Heating & Cooling > Fans).
11
Advertisement
Table of Contents
