Burson Timekeeper 3X Grand Tourer User Manual

Burson Timekeeper 3X Grand Tourer User Manual

Mono-block power amplifier

Advertisement

Quick Links

Burson
Timekeeper 3X Grand Tourer (R-300)
Mono-Block Power Amplifier
User Manual
Register for warranty Ref. page 8 for details

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Timekeeper 3X Grand Tourer and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Burson Timekeeper 3X Grand Tourer

  • Page 1 Burson Timekeeper 3X Grand Tourer (R-300) Mono-Block Power Amplifier User Manual Register for warranty Ref. page 8 for details...
  • Page 2 After carefully unpacking your Burson Timekeeper 3XGT, inspect for any shipping damage and call your dealer immediately if any is found. Do not plug your Burson Timekeeper 3XGT into any outlet if you find shipping damage. Please save all packing materials so the unit can be easily and safely shipped if the need arises.
  • Page 3 Basic Setup...
  • Page 4 Connections...
  • Page 5 RCA Low Gain: Green Break-in, Warm-up and Caring. The sound of the Burson Timekeeper 3XGT improves steadily within minutes after powered-up. Depending on the resolution of the system and the attentiveness of the listener, you may find that the sound continues to improve over the first weeks of operation.
  • Page 6 Opamp Change & Upgrade The Burson Timekeeper 3XGT allows opamp changing to customise its sound to the owner’s preference. When changing opamps, please be aware of the following: The opamp power supply voltage in the Burson Timekeeper 3XGT is +/-15V. Always remove the power supply before opening up the unit.
  • Page 7 12V Trigger Switch Setup (Chain Start) To chain on and off the above Burson system, please press the power button of the master unit. The Initial Powering up Make sure volume control of your preamp has been turned to minimal when using your Timekeeper 3XGT for the first time.
  • Page 8 Burson shall not, under any circumstances, be liable for any incidental or consequential damages arising from the loss of property or other damage or losses due to the failure of a Burson Timekeeper 3i. Burson will not pay for loss of use or inconvenience caused by the failure of a Burson Timekeeper 3i. Burson will not pay for damage caused to other audio components caused by the failure of the Burson Timekeeper 3i within the limits allowed by Australian Law.

This manual is also suitable for:

Timekeeper 3x gtTimekeeper 3xm gtR-300

Table of Contents