12V Trigger Switch Setup (Chain Start)
To chain on and off the above Burson system, please press the power button of the master unit.
The Initial Powering up
Make sure volume control of your preamp has been turned to minimal when using your Timekeeper 3XGT for the
first time. If you are not using the above chain start system then always power on your source machine first and
your power amp last. When powering down your system, reverse these steps.
To select the Source - Rotate the Volume dial until the desired input is shown and press inwards to Select.
Free Warranty Extension
All Burson Audio products are covered by 24 months + 12 months of warranty (See conditions below).
https://www.bursonaudio.com/warranty/.
6