Thank You. All of us at Burson Audio would like to say thank you, and congratulations for purchasing the Burson Timekeeper. We sincerely believe that your Burson Timekeeper is an intelligent investment that will bring you many years of musical enjoyment and satisfaction.
Page 3
After carefully unpacking your Burson Timekeeper, inspect for any shipping damage and call your dealer immediately if any is found. Do not plug your Burson Timekeeper into any outlet if you find shipping damage. Please save all packing materials so the unit can be easily and safely shipped if the need arises.
Page 4
Connections This section provides instructions to connect the Burson Timekeeper to the rest of your music system. BURSON Power indicator
...
Switching between Stereo Power Amp and Mono block Please power off the Burson Timekeeper before switching between Stereo Power Amp and Mono block configuration. Please see to following connection diagram for the correct way to connect the Timekeeper. Stereo Mode Connections...
Check to make sure your Burson Timekeeper has been manufactured for operation at your AC line voltage. Attempting to use your Burson Timekeeper at any voltage other than specified on the rear of the unit may cause damage that is not covered by Burson’s warranty.
Burson. Burson will not pay for loss of use or inconvenience caused by the failure of a Burson. Burson will not pay for damage caused to other audio components caused by the failure of the Burson within the limits allowed by Australian Law.