Related Manuals for Burson Playmate
Summary of Contents for Burson Playmate
- Page 1 Burson Playmate Headphone Amplifier / Pre Amplifier / USB DAC User Manual A free warranty extension to 5 years! Ref. page 6 for details ...
- Page 2 Thank You. All of us at Burson Audio would like to say thank you, and congratulations for purchasing the Burson Playmate. We sincerely believe that your Burson Playmate is an intelligent investment that will bring you many years of musical enjoyment and satisfaction. ...
- Page 3 Make sure the unit is off. ( o ). Then insect the Playmate into the PC drive bay. Apply 4 X 2.5mm bolt to the side of the Playmate unit and secure it in the PC drive bay. Connect the 12V internal power supply to the Playmate （via the 4 pin Molex socket) ...
- Page 4 Connections ...
- Page 5 Never, connect or disconnect the headphone jack or the RCA cables from the Playmate while music is Playmateing. This could damage the Playmate. After your listening session, please disconnect the ...
- Page 6 Opamp Change & Upgrade The Burson Playmate allows opamp changing to customise its sound to the owner’s preference. When changing opamps, please be aware of the following: The opamp power supply voltage in the Burson Playmate is +/-15V ...
- Page 7 The Initial Powering up Make sure volume control has been turned to minimal when using your Playmate for the first time. Always power on your source machine first and your power amp last. When powering down your system reverse the steps. ...
Need help?
Do you have a question about the Playmate and is the answer not in the manual?
Questions and answers