DeWalt DCLE34021 Instruction Manual page 8

English

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the
instruction manual.
Contents
• Laser Information
• User Safety
• Batteries
• Operating Tips
• Turning the Laser ON
• Checking Laser Accuracy
• Field Calibration Check
• Using the Laser
• Maintenance
• Troubleshooting
• Accessories
• Service and Repairs
• Warranty
• Specifications
LASER INFORMATION
The DCLE34021 and DCLE34022 Laser Levels are Class 2 laser
products and comply with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to laser notice No. 56, dated
May 8, 2019.
The DCLE34021 and DCLE34022 lasers are self‑leveling laser
tool that can be used inside and outside for horizontal (level),
vertical, and plumb alignment projects.
Conforms to UL STDS 61010‑1 & 2595
Certified to CSA STD C22.2 No. 61010‑1
supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance information
Unique Identifier: DCLE34021, DCLE34022
Responsible Party – U.S. Contact Information
D WALT
e
701 East Joppa Road
Towson, Maryland 21286
www.D WALT.com
e
FCC Compliance Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio and television reception, which can be
determined by turning the equipment off and on, the user is
6
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
ISED Compliance Statement
This device contains license‑exempt transmitter(s)/receiver(s)
that comply with Innovation, Science, and Economic
Development Canada's license‑exempt RSS(s). Operation is
subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including
interference that may cause undesired operation of
the device.
USER SAFETY
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert
symbols and words to alert you to hazardous situations and
your risk of personal injury or property damage.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
If you have any questions or comments about
this or any D
call 1‑800‑4‑D
or go to www.D

WARNING: Never modify the tool or any part of it.
Damage to the laser or personal injury could result.

WARNING: Read and understand all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
sAVE ThEsE insTRUCTiOns

WARNING: Laser Radiation Exposure. Do not
disassemble or modify the laser level. There are no user
serviceable parts inside. Serious eye injury could result.

WARNING:Hazardous Radiation. Use of controls
or adjustments or performance of procedures other
WALT tool,
e
WALT (1‑800‑433‑9258)
e
WALT.com.
e