Download Print this page

DeWalt DCLE34021 Instruction Manual page 15

20v max cross line laser
Hide thumbs Also See for DCLE34021:

Advertisement

Available languages

Available languages

of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
If you need any assistance in locating any accessory, please
contact your nearest D
WALT service center or go to
e
www.D
WALT.com.
e
Target Card (Fig. O)
Some laser kits include a Laser Target Card to aid in locating
and marking the laser beam. The target card enhances the
visibility of the laser beam as the beam crosses over the card.
The card is marked with standard and metric scales. The laser
beam passes through the green plastic and reflects off of the
reflective tape on the reverse side. The magnet at the top of
the card is designed to hold the target card to ceiling track or
steel studs to determine plumb and level positions. For best
performance when using the Target Card, the D
should be facing you.
Light Source
Laser Wavelength
Laser Power
Working Range
Accuracy (Level)
Battery Low
Continuous Flashing
Laser Beams
Power Source
Service Temperature
Storage Temperature
Humidity
Environmental
Altitude
WALT recommended
e
WALT logo
e
≤1.50 mW (each beam) CLASS 2 LASER PRODUCT
Maximum 80% for temperatures up to 88 °F (31 °C),
decreasing linearly to 50% relative humidity at 104 °F (40 °C)
Water & Dust Resistant to IP54. Applies to product, not battery or charger.

WARNING: This product (not including the battery pack or charger) has an IP rating
which provides some level of protection from dust (limited ingress) and liquids (light
splashing) during normal and reasonably foreseeable use. The battery pack and
charger do not have an IP rating on their own. NEVER submerge the product, battery
or charger in liquid.
Service and Repairs
nOTE: Disassembling the laser level(s) will void all
warranties on the product.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by authorized service
centers. Service or maintenance performed by unqualified
personnel may result in a risk of injury. To locate your nearest
D
WALT service center call 1‑800‑4‑D
e
or go to www.D
WALT.com.
e
Warranty
Go to www.D
WALT.com for the latest
e
warranty information.
DCLE34021, DCLE34022
Laser diodes
510 – 530nm visible
180' (55 m)
330' (100 m) with detector
±1/8" per 30' (±3.1mm per 9 m)
Laser beams flash with 3 quick pulses
Tilt range exceeded/unit is not level
D
WALT 20V Battery Pack
e
39.2 °F to 104 °F (4 °C to 40 °C)
39.2 °F to 104 °F (4 °C to 40 °C)
Up to 6500' (2000m)
English
WALT (1‑800‑433‑9258)
e
13

Advertisement

loading

This manual is also suitable for:

Dcle34022