Using The Security Lock Feature; Setting Security Using The Embedded Web Server (Ews); Setting The System Password; Using The Secure Embedded Web Server - Lexmark C520 User Manual

Using the security lock feature

The printer is equipped with a security lock feature. When a lock compatible with most laptop computers is attached, the
printer is locked. Once locked, the metal plate and the system board cannot be removed. Attach a security lock to the
printer in the location shown as follows.

Setting security using the Embedded Web Server (EWS)

To enhance the security of network communications and device configuration, use the advanced security options. These
features are available through the Web page of the device.

Setting the system password

Setting the system password protects configuration of the Embedded Web Server. A system password is also required for
Secure mode and confidential communication with MVP.
To set the system password:
1
Open the Web browser. In the address line, enter the IP address of the printer being configured using the format:
http: //ip_address/.
2
Click Configuration.
3
Under Other Settings, click Security.
4
Click Create Password, if one has not been set previously. If a password has been set before, click Change or
Remove Password.

Using the secure Embedded Web Server

The SSL (Secure Sockets Layer) allows for secure connections to the Web server within the print device. To connect to the
Embedded Web Server more securely connect to the SSL port instead of the default HTTP port. The SSL port connection
will encrypt all Web server network communications between the PC and the printer.
To connect to the SSL port:
1
Open the Web browser.
2
In the address line, enter the IP address of the printer being configured using the format: https: //ip_address/.
Administrative support
Using the security lock feature
115