Disabling Power Saver; Encrypting The Disk - Lexmark C520 User Manual

Disabling Power Saver

Disabling Power Saver is a two-step process. First, the menu item is turned on, and then the menu item is selected.
1
Turn the printer off.
2
Press and hold
3
Release the buttons when the clock appears.
CONFIG MENU appears on the first line of the display.
4
Press until
5
Press until
Submitting Selection appears. The operator panel returns to the CONFIG MENU.
6
Press until
Resetting the printer appears briefly. The operator panel returns to Ready.
7 Press
to enter the menus.
8
Press until
9
Press until
10
Press until
11
Press or
Submitting Selection appears. Power Saver is disabled.

Encrypting the disk

Warning: All resources on the hard disk will be deleted. Resources residing in flash memory or in RAM remain
unaffected.
Note: This setting is only available when a hard disk is installed.
1
Turn the printer off.
2
Press and hold
3
Release the buttons when the clock appears.
CONFIG MENU appears on the first line of the display.
4
Press until
5
Press until
Contents will be lost. Continue? appears.
6
Press until
The Encrypting Disk progress bar appears.
7
Press when the disk encryption finishes.
8
Press until
To disable disk encryption:
1
Turn the printer off.
2
Press and hold
The clock appears followed by CONFIG MENU.
Administrative support
and while turning the printer on.
Energy Conserve appears, and then press
Off appears, and then press
Exit Config Menu appears, and then press
Settings appears, and then press
Setup Menu appears, and then press
Power Saver appears, and then press
until Disabled appears is on the display, and then press
and while turning the printer on.
Disk Encryption appears, and then press
Enable appears, and then press
Yes appears, and then press
Exit Config Menu appears, and then press
and while turning the printer on.
Disabling Power Saver
.
.
.
.
.
.
.
.
.
.
108
.