Chapter 31: Disabling Power Saver - Lexmark C750 User Reference Manual

31
Disabling Power Saver
Disabling Power Saver
1
Press Menu until you see Setup Menu, and then press Select.
2
Press Menu until you see Power Saver, and then press Select.
3
Press Menu until you see Disabled, and then press Select.
If the Disabled value is not available, first change the Energy Conserve setting to Off in the Config
Menu:
1
Turn the printer off.
2
Press and hold the
3
Release the buttons when Performing Self Test appears on the display.
When the printer self test is done, Config Menu is displayed.
4
Press until you see Energy Conserve, and then press
Menu
5
Press until you see Off, and then press
Menu
Energy Conserve SAVED briefly appears, and then Config Menu is displayed.
6
Press until you see Exit Config Menu, and then press
Menu
Activating Menu Changes briefly appears, followed by Performing Self Test. The
printer returns to the Ready message.
Now you can select the Disabled value from the Power Saver menu item.
Note: You can also disable Power Saver by issuing a Printer Job Language (PJL)
command. For more information, refer to the Technical Reference available on
Lexmark's Web site at www.lexmark.com.
in the Setup Menu helps keep your printer ready to print without delays.
and buttons, and then turn the printer on.
Select Return
Select
.
Select
Select
66
.
.