Philips AUT3234 User Manual page 6

b. Slide the nut of the three-way ball valve onto the 1/4" PE pipe and insert the
pipe into the opening of the three-way ball valve. Tighten the nut with a wrench.
c. Install the three-way ball valve on the cold
water valve. Please don't miss the gasket
inside the three-way ball valve during
installation.
d. Connect the cold water hose with the
three-way ball valve and screw it tightly
with a wrench. Please don't miss the
gasket in the cold water hose during
installation.
Gasket
4
(1)
Gasket
(1)
(2)
(2)