How To Install; Omni Station Buttons; Mop Assembly; Install The Side Brush And The Mop Assembly - Xiaomi X10+ User Manual

Omni Station Buttons

Leave Button
Press to make the robot vacuum leave the omni station.
Clean Button
Press to make the robot vacuum clean all areas.
Dry Button
Press to make the omni station start or stop drying the mop pads.
Notes:
· The buttons on the omni station will work only when the robot vacuum is
connected to the station.
· Before cleaning or maintaining the cleaning tray and the omni station, remove the
robot vacuum from the omni station.

Mop Assembly

Mop Pad
Attachment Area
Mop Pad Holder
10
Mop Pad

How to Install

Remove Protective Coverings
Before using the robot vacuum, remove the protective strips from both
sides.

Install the Side Brush and the Mop Assembly

Install the side brush onto the clip on the bottom of the robot vacuum,
and then install the mop assembly into the mounting holes.
Side Brush Clip