Advertisement
Advertisement
Table of Contents
Related Manuals for Xiaomi Mi Robot Vacuum X10
Summary of Contents for Xiaomi Mi Robot Vacuum X10
- Page 1 Robot Vacuum X10 User Manual ·...
-
Page 2: Safety Information
Safety Information Read this manual carefully before use, and retain it for future reference. cover, cover, or bumper as a handle. Do not use the robot vacuum at an ambient temperature above 40°C or below 0°C or on a floor with liquids •... -
Page 3: Batteries And Charging
cleaning washable parts, fully dry the parts before reinstalling and using them. a cool, dry place. Recharge the robot vacuum at least once every 3 months to avoid over-discharging the battery. Make sure the robot vacuum is turned off when being transported and kept in its original packaging •... -
Page 4: Product Overview
Product Overview Accessories Robot Vacuum Cliff Sensor Pre-installed Accessories Omnidirectional Docking Sensor Wheel Bumper Charging Contacts Side Brush LDS Laser Sensor Cleaning Tool Brush Brush Cover Dust Compartment LDS Laser Sensor Main Wheel Brush Cover Brush Cover Other Accessories Brush Cover Clip Main Wheel Auto-empty Vent Cover... -
Page 5: How To Install
How to Install Auto-empty Station Remove Protective Coverings Connect to An Electrical Outlet Before using the robot vacuum, remove the protective strips from both sides. Place the auto-empty station near an electrical outlet in an area with a good Wi-Fi signal. Then connect the auto-empty station to power, and turn it on. Cover Indicator Power Port... -
Page 6: How To Use
4. After the robot vacuum finishes cleaning and returns to the auto-empty station, · This robot vacuum works with the Mi Home/Xiaomi Home app, and it supports Android 4.4 & iOS press the release buttons on both sides of the water tank, and pull the mopping 10.0 or above. -
Page 7: Care And Maintenance
Care & Maintenance Empty the Dust Compartment Update the Firmware Brush and Side Brush Omnidirectional Wheel * It is recommended to clean every two weeks. * Clean it as needed. When the robot vacuum has finished a cleaning task, it will return to the auto- You can update the firmware via the app. - Page 8 Sensors and Charging Contacts Air Duct on the Auto-empty Station Charging Contacts & Auto-empty Vents * Monthly cleaning is recommended. * Clean it as needed. * Clean it as needed. 2. Remove the dust and debris from the filter with a dry cloth. Use a soft cloth to clean all sensors and charging contacts in the robot vacuum: If the air duct is blocked, follow the steps below to clean it.
-
Page 9: Specifications
For further information, please go to www.mi.com Specifications Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Dreame (Tianjin) Information Technology Co., Ltd. (a Mi Ecosystem company) Address: Room 2112-1-1, South District, Finance and Trade Center, No.6975 Yazhou Road, Dongjiang Bonded Port Area, Tianjin Pilot Free Trade Zone, 300463 Tianjin, China...
Need help?
Do you have a question about the Mi Robot Vacuum X10 and is the answer not in the manual?
Questions and answers