Wireless Setup Program Cannot Communicate With The Printer During Installation - Lexmark X9575 Getting Started

The security key must follow the following criteria:
WEP key
Exactly 10 or 26 hexadecimal characters. Hexadecimal
•
characters are A–F, a–f, and 0–9.
Exactly 5 or 13 ASCII characters. ASCII characters are
•
letters, numbers, punctuations, and symbols found
on a keyboard.
Wireless setup program cannot communicate with the printer
during installation
These are possible solutions. Try one or more of the following:
C
HECK POWER
Make sure the light is on.
C
HECK THE INSTALLATION CABLE
Windows users only
1
Disconnect the installation cable, and check it for any obvious damage.
2
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the
3
Firmly plug the square end of the USB cable into the USB port on the back of the printer.
4
Cancel the software installation.
5
Do one of the following:
In Windows Vista, click
•
In Windows XP and earlier, click Start.
•
6
Click Programs or All Programs ªLexmark 9500 Series.
7
Click Wireless Configuration Utility.
8
Follow the instructions on the computer screen.
Mac users only
1
Disconnect the installation cable, and check it for any obvious damage.
2
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the
3
Firmly plug the square end of the USB cable into the USB port on the back of the printer.
4
From the Finder desktop, double-click the Lexmark 9500 Series folder.
5
Double-click Wireless Setup Assistant.
6
Follow the instructions on the computer screen.
WPA key
USB symbol.
.
USB symbol.
Troubleshooting
42
Up to 64 hexadecimal characters. Hexadecimal
•
characters are A–F, a–f, and 0–9.
From 8 to 63 ASCII characters. ASCII characters are
•
letters, numbers, punctuations, and symbols found
on a keyboard.