Table of Contents
Advertisement
Additional printer setup
Connecting the printer using the Wireless Setup Wizard
Before you begin, make sure that:
•
A wireless network adapter is installed in the printer and is working properly. For more information, see the
instruction sheet that came with the wireless network adapter.
•
An Ethernet cable is disconnected from the printer.
•
Active NIC is set to Auto. To set this to Auto, navigate to:
> Settings >
Note: Make sure to turn off the printer, then wait for at least five seconds, and then turn the printer back on.
1
From the printer control panel, navigate to:
> Settings >
> Wireless Connection Setup >
2
Select a wireless connection setup.
Use
Search for networks
Enter a network name Manually type the SSID.
Wi‑Fi Protected Setup Connect the printer to a wireless network using Wi‑Fi Protected Setup.
3
Press
, and then follow the instructions on the printer display.
Connecting the printer to a wireless network using Wi-Fi Protected Setup
Before you begin, make sure that:
•
The access point (wireless router) is Wi‑Fi Protected Setup (WPS) certified or WPS‑compatible. For more
information, see the documentation that came with your access point.
•
A wireless network adapter is installed in the printer and is working properly. For more information, see the
instruction sheet that came with the wireless network adapter.
Using the Push Button Configuration (PBC) method
1
From the printer control panel, navigate to:
> Settings >
> Wireless Connection Setup >
2
Follow the instructions on the printer display.
> Network/Ports >
> Network/Ports >
To
Show available wireless connections.
Note: This menu item shows all broadcast secured or unsecured SSIDs.
Note: Make sure to type the correct SSID.
> Network/Ports >
> Wi‑Fi Protected Setup >
> Active NIC >
> Auto >
> Network [x] >
> Network [x] Setup >
> Network [x] >
> Network [x] Setup >
> Wireless >
> Wireless >
> Start Push Button Method >
29
Advertisement
Table of Contents
