Using This Product In Switzerland - Lexmark X9575 Getting Started

Lexmark x9575: quick start
Hide thumbs Also See for X9575:
Table of Contents

Advertisement

Some parameters required for compliance with Telecom's telepermit requirements are dependent on the equipment
associated with this device. The associated equipment shall be set to operate within the following limits for
compliance to Telecom's specifications:
There shall be no more than 10 call attempts to the same number within any 30 minute period for any single
manual call initiation, and
The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and
the beginning of the next call attempt.
The equipment shall be set to ensure that automatic calls to different numbers are spaced such that there is not
less than 5 seconds between the end of one call attempt and the beginning of another.
South Africa telecommunications notice
This modem must be used in conjunction with an approved surge protection device when connected to the PSTN.

Using this product in Switzerland

This product requires a Swiss billing tone filter (Lexmark part number 14B5109) to be installed on any line which
receives metering pulses in Switzerland. The Lexmark filter must be used, as metering pulses are present on all analog
telephone lines in Switzerland.
Utilisation de ce produit en Suisse
Cet appareil nécessite l'utilisation d'un filtre de tonalité de facturation suisse (nº de référence Lexmark : 14B5123)
devant être installé sur toute ligne recevant des impulsions de comptage en Suisse. Ce filtre doit être utilisé pour
toute installation car ces impulsions existent sur toutes les lignes téléphoniques suisses.
Verwendung dieses Produkts in der Schweiz
Für dieses Produkt muss ein schweizerischer Billing Tone Filter zur Zählzeichenübertragung (Lexmark Teilenummer
14B5109) für jede Leitung installiert werden, über die in der Schweiz Zeitsteuertakte übertragen werden. Die
Verwendung des Lexmark Filters ist obligatorisch, da in allen analogen Telefonleitungen in der Schweiz
Zeitsteuertakte vorhanden sind.
Uso del prodotto in Svizzera
Questo prodotto richiede un filtro toni Billing svizzero, (codice Lexmark 14B5109), da installare su tutte le linee che
ricevono impulsi remoti in Svizzera. È necessario utilizzare il filtro Lexmark poiché gli impulsi remoti sono presenti
su tutte le linee analogiche in Svizzera.
End-user license agreement
Opening this package, installing the printing device software, or using the print cartridges inside, confirms your
acceptance of the following license/agreement: The patented print cartridge(s) contained inside is/are licensed for
a single use only and is/are designed to stop working after delivering a fixed amount of ink. A variable amount of ink
will remain in the cartridge when replacement is required. After this single use, the license to use the print cartridge
terminates, and the used cartridge must be returned only to Lexmark for remanufacturing, refilling or recycling. If
you do not accept the terms of this single use license/agreement, return this product in its original packaging
to your point of purchase. A replacement cartridge sold without these terms is available at www.lexmark.com.
Notices
57

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9575 - x professional color inkjet9500 series

Table of Contents