Safety Warnings - Makita UH013G Instruction Manual

Noise
Applicable standard : EN62841-4-2
UH013G
UH014G
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
WARNING:
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
Be sure to identify safety measures to protect the operator that are based on an estimation
WARNING:
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) determined according to EN62841-4-2:
UH013G
UH014G
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
The vibration emission during actual use of the power tool can differ from the declared
WARNING:
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
Be sure to identify safety measures to protect the operator that are based on an estimation
WARNING:
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings
Read all safety warnings, instruc-
WARNING:
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Model
Model
Sound pressure level
(dB(A)) Uncertainty K
L
pA
(dB(A))
80 3
81 3
Front handle
ah (m/s ) Uncertainty K
2
(m/s
2.5 1.5
3.2 1.5
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless Hedge Trimmer Safety
Warnings
Keep all parts of the body away from the blade.
1.
Do not remove cut material or hold material
to be cut when blades are moving. Blades
continue to move after the switch is turned off. A
moment of inattention while operating the hedge
trimmer may result in serious personal injury.
Carry the hedge trimmer by the handle with the
2.
blade stopped and taking care not to operate
any power switch. Proper carrying of the hedge
trimmer will decrease the risk of inadvertent start-
ing and resultant personal injury from the blades.
9 ENGLISH
Sound power level
(dB(A)) Uncertainty K
L
WA
91
92
Rear handle
ah (m/s ) Uncertainty K
2
)
2
2
2.5 m/s or less
2
2.5 m/s or less
(dB(A))
3
3
(m/s )
2
1.5
1.5