Notices; Safety Information; Emission Notices - Lexmark X820E Setup Manual

Safety information

ty information
Fax and telephone
safety information
Cautions and warnings

Emission notices

ssion notices
26

Notices

To reduce the risk of fire and electric shock when installing or using
telephone equipment, always follow all safety precautions, including
the following:
• If your product is NOT marked with this symbol
connected to an electrical outlet that is properly grounded.
•
The power cord must be connected to an electrical outlet that
is near the product and easily accessible.
•
Refer service or repairs, other than those described in the
operating instructions, to a professional service person.
•
This product is designed, tested, and approved to meet strict
global safety standards with the use of specific Lexmark
components. The safety features of some parts may not always
be obvious. Lexmark is not responsible for the use of other
replacement parts.
• Never perform the setup procedures in this guide during a
lightning storm.
mation
•
Never install or use this equipment in wet locations.
CAUTION! A caution identifies something that might cause you harm.
Warning: rning: A warning identifies something that might damage your
MFP system hardware or software.
The following notices apply to those machines in which the 4036-
501(scanner) and/or 4036-901(control unit) is installed.
vice or repairs, other than those described in the
, it MUST be MUST be
036-