Table of Contents
Advertisement
■JET NOZZLE
Check spraying and whether water is flashing from jet nozzle. (Refer to page 23) If
water flow is weak, There maybe stuck in nozzle. Then please ask dealer to wash he
jet nozzle by dealer.
Please replace it after 500hours operation.
17. Lubrication
LUBRICATION PART
Fulcrum of part
※Even though within 100hours, please replace once a year.
18. Long term storage
In order to maintain lifetime of boom sprayer, it is important to take care machine.
In addition to daily maintenance, please do following;
Each connecting part of end of piping should be removed, and drain totally.
Especially in cold area, it may cause freezing problem for valve & piping, so
Be careful to open the all valves.
① Please check each part and defective part should be repaired or maintained.
② Each connecting part of end of piping should be removed, and drain totally.
After drain out water, run pump for 30seconds and drain water.
③ All spray cock should be positioned on "OPEN"
④ Wash boom sprayer by pure water.
CRANK CASE
SAE10W-30
FOR
more than
PUMP
class SJ
SAE10W-30
OIL INLET
more than
class SJ
Chassis
grease
30
REPLACEMENT
OIL
VOLUME
0.42Litre
every 100hrs(※)
3-5drops
Every operation
Proper
volume
PERIOD
Initial 50hrs,
Once a year
Advertisement
Table of Contents
