Handling And Operating Method; Assembly Of Nozzle - Maruyama MS0735W Owner's/Operator's Manual

3. Handling and operating method

Assembly of nozzle

After confirming the packing is in place, securely tighten nozzle pipe to grip, and wide nozzle to nozzle
pipe. Tighten the screw securly after confirming the packing to make ensure there is no water leakage.
Over-tightening will cause extrusion or break the packing. Correct tightening pressure is important.
Discharge
The adjustment of knapsack strap
1. Tighten the strap
Pull the strap downward.
English
Wide nozzle
End of spraying hose
2. Loosen the strap
Life strap buckle upward to loosen.
Nozzle pipe
Ball cock Spraying hose assembly
Nozzle holder
Nozzle holder is provided in the top of chemical
tank and side part
9
Nozzle holder
The adjustment of chest strap
Pull the chest strap to tighten.
Grip