Setting Defaults - Lexmark X84 User Manual

Basics
Copying
Printing
Scanning
Troubleshooting
Notices
Index

Setting defaults

If you are usually copying and scanning using a particular setting, such as a certain size paper, you
may want to set this as your default. If you are using your printer with a computer, you must make
changes using both the operator panel and the Scan & Copy Control Program.
Using the operator panel:
Make sure:
• Paper Size is set to desired paper
size
• Copy Source Size is set to
desired copy size
1 Press .
Menu
2 Press until Language or
or
Copy Source Size appears on
the display, and then press
3 Press until the desired
or
setting appears on the display,
and then press .
Select
4 Press .
Menu
5 Press until Set Defaults
or
appears on the display, and then
press .
Select
www.lexmark.com
Lexmark X84-X85
Using the computer:
Make sure:
• Paper Size is set to desired paper size
• The area to be scanned is set to the desired paper
size in the Scan & Copy Control Program
1 From your program File menu, select Print.
2 To customize print settings, click Properties or Printer
Preferences.
3 Select the Paper tab to select the paper size you want,
.
Select
and then click OK.
4 Click Start Programs
Copy Control Program.
5 Click File Setup, and then select the Page tab.
6 Select the paper size you want, and then click OK.
Basics 15
Lexmark X84-X85 Scan &