B120I Module; Hpe Smartdrive Led Definitions - HP HPE ProLiant ML350e Gen8 Maintenance And Service Manual

B120i module

The FBWC module has three LEDs (one amber and two green).
1 - Amber
Off
Off
Off
Off
Off
Off
Off
Off
Flashing 1 Hz
Flashing 1 Hz
Flashing 1 Hz
Flashing 2 Hz
Flashing 2 Hz
On
On

HPE SmartDrive LED definitions

HPE SmartDrives are the latest Hewlett Packard Enterprise drive technology, and they are supported
beginning with ProLiant Gen8 servers and server blades. The SmartDrive is not supported on earlier
generation servers and server blades. Identify a SmartDrive by its carrier, shown in the following
illustration.
2 - Green 3 - Green
Off Off
Flashing 0.5 Hz Flashing 0.5 Hz The FBWC microcontroller is executing from within its
Flashing 1 Hz Flashing 1 Hz
Off Flashing 1 Hz
Off On
On On
Flashing 1 Hz Off
On Off
Flashing 1 Hz Off
Flashing 1 Hz On
On Off
Flashing 2 Hz Off
Flashing 2 Hz On
On Off
On On
Interpretation
The FBWC module is not powered.
boot loader and receiving new flash code from the host
controller.
The FBWC module is powering up, and the capacitor
pack is charging.
The FBWC module is idle, and the capacitor pack is
charging.
The FBWC module is idle, and the capacitor pack is
charged.
The FBWC module is idle, the capacitor pack is
charged, and the cache contains data that has not yet
been written to the drives.
A backup is in progress.
The current backup is complete with no errors.
The current backup failed, and data has been lost.
A power error occurred during the previous or current
boot. Data might be corrupt.
An overtemperature condition exists.
The capacitor pack is not attached.
The capacitor has been charging for 10 minutes, but
has not reached sufficient charge to perform a full
backup.
The current backup is complete, but power
fluctuations occurred during the backup.
The FBWC module microcontroller has failed.
Component identification 73