TFT YE-RF Series Instructions For Installation

Wireless monitor operator station, radio board and antenna for ye-rf-rad series

Download this manual

G-Force

WARNING

YE-RF-##

TASK FORCE TIPS LLC

MADE IN USA · tft.com

©Copyright Task Force Tips LLC 2007-2021

WIRELESS MONITOR OPERATOR STATION

Radio Board and Antenna for YE-RF-RAD-##

Service technicians bear responsibility for ensuring use of appropriate protective clothing and

equipment. The chosen protective clothing and equipment must provide protection from potential

hazards users may encounter while servicing equipment. Requirements for protective clothing and

equipment are determined by the Authority Having Jurisdiction (AHJ).

Circuit boards are Electrostatic Sensitive Devices.

To prevent damage:

• Disconnect power before servicing equipment.

• Use proper grounding techniques.

• Touch unpainted, exposed metal on monitor or fire truck

before removing and handling circuit boards.

Instruction for Installation of

YE-RF-##-D

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 · 219-462-6161 · Fax 219-464-7155

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

SENSITIVE

DEVICES

LIY-410 May 28, 2021 Rev06

Need help?

Do you have a question about the YE-RF Series and is the answer not in the manual?

Page 1 SENSITIVE DEVICES YE-RF-## YE-RF-##-D TASK FORCE TIPS LLC 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 · 219-462-6161 · Fax 219-464-7155 MADE IN USA · tft.com ©Copyright Task Force Tips LLC 2007-2021 LIY-410 May 28, 2021 Rev06...
Page 2 RADIO INSTALLATION STEP 3 STEP 1 STEP 2 Locate the connector with blue & white Unscrew the lid screws using 3mm hex Unplug the connector with blue & white key. Do not remove the screws from the wires on the communication board (far wires from the communication board.
Page 3 STEP 7 STEP 8 STEP 9 Connect radio board Attach the antenna connector to the radio Reinstall the communication/radio board communication board by aligning pin board in the orientation shown. assembly into the monitor control box. holes and pushing firmly. Press straight in to seat firmly.
Page 4 • Do not mix battery types. • Properly dispose of old batteries. • Do not puncture, incinerate, or disassemble batteries. For questions or assistance with this procedure, contact the TFT Customer Service Team. TASK FORCE TIPS LLC 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 ·...

Ye-rf-d series