Table of Contents
Advertisement
Quick Links
™
Working Fire
Handheld Nozzle
INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION, AND MAINTENANCE
Understand manual before use. Operation of this device without understanding the manual and
WARNING
receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/serial-
number.
This equipment is intended for use by trained and qualified emergency services personnel for
firefighting. All personnel using this equipment shall have completed a course of education
approved by the Authority Having Jurisdiction (AHJ).
This instruction manual is intended to familiarize firefighters and maintenance personnel with the
operation, servicing, and safety procedures associated with this product. This manual should be
kept available to all operating and maintenance personnel.
TASK FORCE TIPS LLC
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 · 219-462-6161 · Fax 219-464-7155
MADE IN USA · tft.com
©Copyright Task Force Tips LLC 2020
1
LIN-070 September 29, 2020 Rev01
Advertisement
Table of Contents
Related Manuals for TFT Working Fire
Summary of Contents for TFT Working Fire
- Page 1 Understand manual before use. Operation of this device without understanding the manual and WARNING receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/serial- number. This equipment is intended for use by trained and qualified emergency services personnel for firefighting.
- Page 2 DANGER PERSONAL RESPONSIBILITY CODE The member companies of FEMSA that provide emergency response equipment and services want responders to know and understand the following: 1. Fire ghting and Emergency Response are inherently dangerous activities requiring proper training in their hazards and the use of extreme caution at all times.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1.0 MEANING OF SAFETY SIGNAL WORDS 2.0 SAFETY 3.0 GENERAL INFORMATION 3.1 VARIOUS MODELS AND TERMS 3.2 SPECIFICATIONS 3.3 NOZZLE COUPLINGS 3.4 USE WITH SALT WATER 4.0 FLOW CHARACTERISTICS 5.0 NOZZLE CONTROLS 5.1 FLOW CONTROL 5.1.1 LEVER TYPE FLOW CONTROL (BALL VALVE) 5.1.2 TIP ONLY NOZZLES 5.2 PATTERN CONTROL 5.3 FLUSH CONTROL... -
Page 4: Meaning Of Safety Signal Words
MEANING OF SAFETY SIGNAL WORDS A safety related message is identified by a safety alert symbol and a signal word to indicate the level of risk involved with a particular hazard. Per ANSI Z535.6, the definitions of the four signal words are as follows: DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. -
Page 5: General Information
VARIOUS MODELS AND TERMS Working Fire nozzles are available in several different models and inlet connections. Basic body styles are shown below. All models deliver the rated flow rate when the rated pressure is supplied to the nozzle inlet. Hose diameters of 1.5" (38mm) or larger are recommended to achieve the intended flow and stream reach. -
Page 6: Flow Characteristics
FLOW CHARACTERISTICS WF1*-173 MODELS 150 GPM @ 75 PSI (570 L/min @ 5 bar) FLOW (LPM FLOW (GPM) Figure 4.0A WF1*-226 MODELS 160 GPM @ 50 PSI (600 L/min @ 3.4 bar) FLOW (LPM FLOW (GPM) Figure 4.0B ©Copyright Task Force Tips LLC 2020 LIN-070 September 29, 2020 Rev01... -
Page 7: Nozzle Controls
LEVER TYPE FLOW CONTROL (BALL VALVE) Models with a ball valve are shut off when the valve handle is fully forward. Pulling back on the handle opens the valve. TFT recommends the use of a pistol grip for easier handling. For additional stress reduction, a hose rope or strap may also be used. This permits more effective use and ease of advancement, while minimizing strain and fatigue. -
Page 8: Use With Foam
COLOR CODED NOZZLE COMPONENTS Working Fire nozzles are available with Black, Blue, Red, or Yellow handle covers, pistol grip, and tactile indicator at the time of order. These field replaceable components are also available to departments wishing to change the color coding after order. Contact tft.com or your dealer to order color coded components. -
Page 9: Warranty
46383-9327 USA, within a reasonable time after discovery of the defect. TFT will examine the equipment. If TFT determines that there is a defect attributable to it, TFT will correct the problem within a reasonable time. If the equipment is covered by this limited warranty, TFT will assume the expenses of repair. -
Page 10: Maintenance
Repair parts and service procedures are available for those wishing to perform their own repairs. Task Force Tips assumes no liability for damage to equipment or injury to personnel that is a result of user service. Contact the factory or visit the web site at tft.com for parts lists, exploded views, test procedures and troubleshooting guides. - Page 11 ©Copyright Task Force Tips LLC 2020 LIN-070 September 29, 2020 Rev01...
-
Page 12: Operation And Inspection Checklist
Operating equipment that has failed the checklist is a misuse of this equipment. TASK FORCE TIPS LLC 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 · 219-462-6161 · Fax 219-464-7155 MADE IN USA · tft.com ©Copyright Task Force Tips LLC 2020 LIN-070 September 29, 2020 Rev01...
Need help?
Do you have a question about the Working Fire and is the answer not in the manual?
Questions and answers