Page 1
Handheld Thermography Camera HIKMICRO E Series User Manual...
Page 2
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE...
Page 3
Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 4
symbol cannot be disposed of as unsorted municipal waste in the United Kingdom. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.
Page 5
For more detailed calibration services, please refer to HIKMICRO official website. Using Environment ● Make sure the running environment meets the requirement of the device. The operating temperature shall be -10 °C to 50 °C (14 °F to...
Page 6
Technical support ● The https://www.hikmicrotech.com portal will help you as a HIKMICRO customer to get the most out of your HIKMICRO products. The portal gives you access to our support team, software and documentation, service contacts, etc. Emergency ● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.
It helps the users to find the risky part and reduce their property loss. You can view live view, capture snapshots, record videos via HIKMICRO Viewer App on your phone. You can also analyze pictures offline, generate and share a report via the app. Scan the QR codes on the cover to download the App.
2 Appearance Dimensions 59mm(2.32") 78mm(3.07") The dimension may vary according to different camera model. Interfaces Screen Charging Back Indicator On/OK/Menu Navigation Hold: Power On/Off Press: Display menu or confirm operation Exit the menu or return to previous menu. Navigation Button Press to select parameters.
Cover USB Interface Micro SD Slot Laser Tripod IR Lens Interface Trigger Note: The warning sign is under the laser and on the left side of the device. Charging When the device is charging, Indicator the LED indicator is red. When the device is fully charged, the LED indicator is green.
For the first charge, charge the device for more than 8 hours when the device is turned on. The built-in cell battery that powers the real time clock (RTC) of the device may drain during longtime transportation or storage.
and device displays the snapshot with temperature information. Press to save the picture, press to cancel it. Note: You cannot capture when the device is connected with PC. View Snapshots Steps: In the live view interface, press show the menu. Press to select Picture.
Emissivity: Set the emissivity of your target as the effectiveness in emitting energy as thermal radiation. Note: Refer to the 6.1 Common Material Emissivity Reference for emissivity values. Meas. Range: Select the temperature measurement range. The device can detect the temperature and switch thermography range automatically in Auto Switch mode.
Set Date and Time In the live view interface, press and select Time & Date to set the information. Format Memory Card Before you start: Confirm the memory card is properly installed before use. Steps: In the live view interface, press show the menu bar.
Asphalt 0.96 Brick 0.95 Sand 0.90 Soil 0.92 Cotton 0.98 Cardboard 0.90 White Paper 0.90 Water 0.96 Frequently Asked Questions (FAQ) Q: The charge indicator flashes red. Examine the items below. Examine whether the device is charged with the standard power adapter. Plug and unplug the battery once.